Project Description
Apollo 2400 is a high-performance LED module based on Flip Chip Opto’s patented 3-Pad LED Flip Chip and Pillar MCPCB technologies. Both junction temperature and thermal decay are minimized due to its extremely low thermal resistance, thus allowing illumination designers to maximize the “lumen per dollar” value through solutions such as brightness boosters, smaller heatsinks, and optics.
Array Configuration: 15S12PX4
Dimensions (mm): D=140, H=2.8
LES (mm): 106
Features:
- Patented DBR Flip Chips (45x45mil)
- Patented Copper Based Pillar MCPCB
- 2433.6W Maximum Power
- Available in 4000K, 5000K, 5700K CCT
- Available in 70-, 80-, 90- CRI Options
- 106mm Light Emitting Surface
- 0.003°C/W Thermal Resistance
- Low Temperature Bonding
- No Wire Bonding
- RoHS Compliant
| CRI (Ra) | CCT (K) | Forward Current (mA) | Watts (w) | Luminous Flux (lm) | Voltage | Thermal Resistance |
|---|---|---|---|---|---|---|
| 80 | 5000 | 48000 | 2433.6 | 236060 | 50.7 | 0.003 |
| 80 | 4000 | 48000 | 2433.6 | 229017 | 50.7 | 0.003 |
| 80 | 3000 | 48000 | 2433.6 | 214160 | 50.7 | 0.003 |
About the Apollo Series
The Apollo Series is a fleet of high-performance LED modules based on Flip Chip Opto’s patented 3-Pad Flip Chip LED and Pillar MCPCB technologies. Both junction temperature and thermal decay are minimized due to its extremely low thermal resistance, and therefore illumination designers benefit from the maximized “lumen per dollar” value through solutions such as brightness boosters, minimized heatsinks, and optics.
